New Konker KPX150SR Dirt Bike
MSRP $3,495 *Plus Freight, PDI, Documentation fee and Taxes*
Financing available for motorcyles, atvs, (under 15 years old) and accessories if purchased at the same time
AVAILABLE COLORS
This is the Konker Motors Flag Ship RACE BIKE! KEEP YOUR EYES on this ONE!
Our limited edition 2009 Konker KPX150SR redefines the term - "Power to Weight" ratio. Its completely CNC Aluminum frame, makes it the strongest, lightest frame available. That coupled with the the 150cc race engine, things are getting a bit rediculous! We've spared no expense in building the 150SR including a aluminum swing Arm, and ALL CNC CONTROLS including, over the top rear brake lever, shifter, clutch and handbrake. Spare Parts Readily Available
KPX150R PRODUCT FEATURES
- CNC Feather light Race Frame
- 150CC Race Ready Engine
- CNC Controls
- ¼ Turn Twist Throttle
- Tall "Gripper" Seat
ALL PARTS and SERVICE AVAILABLE
KONKER Warranty warrants that "Konker Motors" product is free from defective parts, and or workmanship. In the event of defective parts, and or materials, and or workmanship, "Konker Motors Corp", in conjunction with its dealer will supply the parts and labour to remedy the defective material for a period of 12 months after the date of purchase Vancouver Island’s Main Konker Dealer Has Fully Qualified Technicians and parts department.
ENGINE
| Type |  |
150CC Oil-Cooled Single Cylinder four stroke |
| Bore and Stroke | |
56.5mm x 59mm |
| Ignition | |
CDI unit, inner rotor kit |
| Induction | |
26mm Mikuni Carb |
| Starting Method | |
Kick Start, Start in Any Gear |
TRANSMISSION
| Type | |
Up 4 - Close Ratio 4 Speed Manual |
| Final Drive | |
420 Chain: 12T / 34T |
CHASIS / SUSPENSION / BRAKES
| Front Suspension | |
37mm fully adjustable compression / rebound dampening with 8" travel, inverted |
| Rear Suspension | |
Aluminum Swing Arm, 1000lbs spring with adjustable compression / rebound |
| Front Brake | |
210mm Disc with large diameter single piston calliper |
| Rear Brake | |
190mm Disc, single piston caliper, Over the top CNC brake pedal |
| Front Tire | |
2.75 x 14" MILLVILLE |
| Rear Tire | |
3.00 x 12" MILLVILLE |
DIMENSIONS
| Full Length | |
65" |
| Full Width | |
30.4" |
| Seat Height | |
31" |
| Wheel Base | |
46" |
| Net Weight | |
138lbs |
| Ground Clearance | |
11" |
| Fuel Capacity | |
3L |
KPX50 | KPX90 | KPX125| KPX150R | KPX150L| KPX150SR| KPX250X